we know what‘s cooking
37/69
Document 10000028013-DOC-000-00-EN
Program 8 (Only with the additional equipment for chilling)
This program starts the heating function and stirrer. After the required period of time, the temperature set
point, heating power, stirring pattern and RPM are altered. After a period of time, chilling to a temperature
set point is started. When this temperature has been reached, the chilling function and the stirrer are
stopped and the beeper is activated.This could be used, for example, for cooking followed by warm-
keeping and chilling.
Program 9 (Only with the additional equipment for chilling)
5 Pause until the set point for food temperature has
been reached
6 Switch off chilling
7 Switch off the stirrer
8 Activate beeper
Step Action Parameter
1 Switch to heating mode
2 Set the set point for food temperature and heating
power
P02.1 Food temperature
P02.2 Heating power
3 Switch on heating
4 Set stirring pattern and stirring RPM
Switch on the stirrer
P04.1 Stirring pattern
P04.2 Stirring rate
If stirring pattern 0 is selected, this
step will be skipped
5 Pause for required time P05.1 Time
6 Set the set point for food temperature and heating
power
P06.1 Food temperature
P06.2 Heating power
7 Set stirring pattern and stirring RPM
Switch on the stirrer
P04.1 Stirring pattern
P04.2 Stirring rate
If stirring pattern 0 is selected, this
step will be skipped
8 Pause for required time P08.1 Time
9 Switch to chilling mode
10 Set the set point for food temperature and chilling
power
P10.1 Food temperature
P10.2 Chilling power
11 Switch on chilling
12 Set stirring pattern and stirring RPM
Switch on the stirrer
P12.1 Stirring pattern
P12.2 Stirring rate
If stirring pattern 0 is selected, this
step will be skipped
13 Pause until the set point for food temperature has
been reached
14 Switch off chilling
15 Switch off the stirrer
16 Activate beeper
To Next Page
Loading...
