38/69
Document 10000028013-DOC-000-00-EN
we know what‘s cooking
This program adds water to the kettle and starts the heating function and stirrer at a set time. After the
required period of time, the temperature set point, heating power, stirring pattern and RPM are altered.
After a period of time, chilling to a temperature set point is started. When this temperature has been
reached, the chilling function and the stirrer are stopped and the beeper is activated.This program could
be used, for example, to automatically start cooking followed by warm-keeping and chilling.
Program 10 (Only with the additional equipment for chilling)
This program chills the contents of the kettle and switches to heating after a set period of time. After the
required period of time, the temperature set point, heating power, stirring pattern and RPM are altered.
After a period of time, chilling to a temperature set point is started. When this temperature has been
reached, the chilling function and the stirrer are stopped and the beeper is activated.This can be used
to keep the contents of the kettle cold, automatic cooking with subsequent warm keeping followed by
chilling.
Step Action Parameter
1 Switch to heating mode
2 Pause until set time is reached P02.1 Time
3 Add water in required quantity P03.1 Water quantity
4 Set the set point for food temperature and heating
power
P04.1 Food temperature
P04.2 Heating power
5 Switch on heating P05.1 Time
6 Set stirring pattern and stirring RPM
Switch on the stirrer
P06.1 Stirring pattern
P06.2 Stirring rate
If stirring pattern 0 is selected, this
step will be skipped
7 Pause for required time P07.1 Time
8 Set the set point for food temperature and heating
power
P08.1 Food temperature
P08.2 Heating power
9 Set stirring pattern and stirring RPM
Switch on the stirrer
P09.1 Stirring pattern
P09.2 Stirring rate
If stirring pattern 0 is selected, this
step will be skipped
10 Pause for required time P10.1 Time
11 Switch to chilling mode
12 Set the set point for food temperature and chilling
power
P12.1 Food temperature
P12.2 Chilling power
13 Switch on chilling
14 Set stirring pattern and stirring RPM
Switch on the stirrer
P14.1 Stirring pattern
P14.2 Stirring rate
If stirring pattern 0 is selected, this
step will be skipped
15 Pause until the set point for food temperature has
been reached
16 Switch off chilling
17 Switch off the stirrer
18 Activate beeper
Step Action Parameter
1 Switch to chilling mode
To Next Page
Loading...
