we know what‘s cooking
39/69
Document 10000028013-DOC-000-00-EN
Program 11 (Only with the additional equipment for chilling)
This program starts the heating function and stirrer. After the required period of time, the temperature set
point, heating power, stirring pattern and RPM are altered. After a period of time, chilling to a temperature
set point is started. When this temperature has been reached, the chilling function and the stirrer contin-
ues and the beeper is activated.This could be used, for example, for cooking followed by warm-keeping
and chilling.
2 Set the set point for food temperature and chilling
power
P02.1 Food temperature
P02.2 Chilling power
3 Switch on chilling
4 Set stirring pattern and stirring RPM
Switch on the stirrer
P04.1 Stirring pattern
P04.2 Stirring rate
If stirring pattern 0 is selected, this
step will be skipped
5 Pause for required time P05.1 Time
6 Switch to heating mode
7 Set the set point for food temperature and heating
power
P07.1 Food temperature
P07.2 Heating power
8 Switch on heating
9 Set stirring pattern and stirring RPM
Switch on the stirrer
P09.1 Stirring pattern
P09.2 Stirring rate
If stirring pattern 0 is selected, this
step will be skipped
10 Pause for required time P10.1 Time
11 Set the set point for food temperature and heating
power
P11.1 Food temperature
P11.2 Heating power
12 Set stirring pattern and stirring RPM
Switch on the stirrer
P12.1 Stirring pattern
P12.2 Stirring rate
If stirring pattern 0 is selected, this
step will be skipped
13 Pause for required time P13.1 Time
14 Switch to chilling mode
15 Set the set point for food temperature and chilling
power
P15.1 Food temperature
P15.2 Chilling power
16 Switch on chilling
17 Set stirring pattern and stirring RPM
Switch on the stirrer
P17.1 Stirring pattern
P17.2 Stirring rate
If stirring pattern 0 is selected, this
step will be skipped
18 Pause until the set point for food temperature has
been reached
19 Switch off chilling
20 Switch off the stirrer
21 Activate beeper
Step Action Parameter
1 Switch to heating mode
To Next Page
Loading...
