40/69
Document 10000028013-DOC-000-00-EN
we know what‘s cooking
Program 12
This program starts the heating and stirrer. When the required temperature has been reached, the tem-
perature set point, heating power, stirring pattern and RPM are altered. After the required period of time,
the temperature set point, heating power, stirring pattern and RPM are altered again. This could be used,
for example, for heating up, cooking, followed by warm-keeping.
2 Set the set point for food temperature and heating
power
P02.1 Food temperature
P02.2 Heating power
3 Switch on heating
4 Set stirring pattern and stirring RPM
Switch on the stirrer
P04.1 Stirring pattern
P04.2 Stirring rate
If stirring pattern 0 is selected, this
step will be skipped
5 Pause for required time P05.1 Time
6 Set the set point for food temperature and heating
power
P06.1 Food temperature
P06.2 Heating power
7 Set stirring pattern and stirring RPM
Switch on the stirrer
P07.1 Stirring pattern
P07.2 Stirring rate
If stirring pattern 0 is selected, this
step will be skipped
8 Pause for required time P08.1 Time
9 Switch to chilling mode
10 Set the set point for food temperature and chilling
power
P10.1 Food temperature
P10.2 Chilling power
11 Switch on chilling
12 Set stirring pattern and stirring RPM
Switch on the stirrer
P12.1 Stirring pattern
P12.2 Stirring rate
If stirring pattern 0 is selected, this
step will be skipped
13 Pause until the set point for food temperature has
been reached
14 Activate beeper
Step Action Parameter
1 Switch to heating mode
2 Set the set point for food temperature and heating
power
P02.1 Food temperature
P02.2 Heating power
3 Switch on heating
4 Set stirring pattern and stirring RPM
Switch on the stirrer
P04.1 Stirring pattern
P04.2 Stirring rate
If stirring pattern 0 is selected, this
step will be skipped.
5 Pause for required temperature
6 Set the set point for food temperature and heating
power
P06.1 Food temperature
P06.2 Heating power
To Next Page
Loading...
