What to do if Jonsered FR 2216 MA 4X4 Lawn Mower battery does not charge?
If the battery on your Jonsered Lawn Mower isn't charging, it could be due to one or more faulty battery cells, in which case you should replace them. Also, ensure good contact on the battery terminal cable connectors.
General| Brand | Jonsered |
|---|---|
| Model | FR 2216 MA 4X4 |
| Category | Lawn Mower |
| Language | English |
Illustrates symbols related to operator safety, warnings, and prohibited actions like driving on slopes or carrying passengers.
Explains symbols for ignition, clutch, brake, hydrostatic freewheel, and other operational functions.
Details symbols related to starting instructions, oil checks, and service procedures.
Welcomes the customer and provides a brief overview of the Frontrider's design and benefits.
Covers road traffic regulations, securing the machine for transport, and towing guidelines.
Explains the machine's intended use and the value of good service for warranty and resale.
Emphasizes using genuine parts and contacting dealers for advice and service.
Identifies and labels all major controls, components, and their locations on the machine.
Provides essential safety rules for operating the machine, including PPE and environmental awareness.
Details specific safety measures and techniques for operating the machine on sloped terrain.
Covers safety precautions related to children and essential safety steps for maintenance.
Provides essential instructions for safely securing the machine for transportation.
Introduces key operational controls like speed limiter, parking brake, and throttle.
Explains the function and operation of the cutting unit and its lifting lever.
Covers seat adjustment, fueling procedures, and drive release levers for different models.
Details essential pre-operation checks and preparations before starting the engine.
Provides step-by-step instructions for starting the engine, including cold/warm starts.
Explains emergency starting with jump leads and associated safety warnings.
Explains how to drive the machine, control speed, and select the cutting height.
Provides instructions on how to safely stop the engine and park the machine.
Lists recommended daily, annual, and hour-based maintenance tasks for optimal machine upkeep.
Guides on cleaning the machine after use, including warnings about high-pressure washers.
Details how to remove engine cover and fenders for access to components.
Covers muffler checks, steering wire tension, and adjustment procedures.
Details adjusting the parking brake and the throttle cable for proper function.
Explains replacing air and fuel filters, and checking the fuel pump's air filter.
Guides on replacing spark plugs, checking fuses, safety systems, and cooling air intake.
Details adjusting the cutting unit's ground pressure and parallelism for optimal cutting.
Covers placing the unit in service position and checking/replacing blades.
Provides instructions for checking and changing the engine oil and oil filter.
Explains lubrication of the belt adjuster, joints, bearings, and control wires.
Lists common issues with engine starting, running, power, and overheating, with their causes.
Addresses problems like battery charging, machine vibration, and uneven mowing.
Details how to prepare the machine for long-term storage, including fuel treatment and battery care.
Advises on performing service during the low season and using authorized dealers.
Lists physical dimensions, engine details, electrical system, and transmission specifications.
Provides specifications for the cutting unit, blades, noise, and vibration levels.
Declares the machine's compliance with relevant EU directives and harmonized standards.
To Next Page
