What to do if Jonsered FR 2216 MA Lawn Mower battery does not charge?
If the battery on your Jonsered Lawn Mower isn't charging, it could be due to one or more faulty battery cells, in which case you should replace them. Also, ensure good contact on the battery terminal cable connectors.
General| Brand | Jonsered |
|---|---|
| Model | FR 2216 MA |
| Category | Lawn Mower |
| Language | English |
Lists and explains various symbols found on the machine and in the instructions for safe operation and identification.
Provides step-by-step guidance on how to safely start the engine of the machine.
Welcomes the customer and highlights the value of the operator's manual for machine longevity and resale value.
Advises on checking road regulations and securing the machine properly for transport on public roads or other vehicles.
Explains the precautions and risks associated with towing the machine, especially regarding transmission damage.
Defines the intended use of the ride-on mower and emphasizes compliance with manufacturer recommendations for operation and repair.
Stresses the importance of genuine parts, dealer inspection, and a documented service history for optimal support and resale value.
Lists essential checks and tasks to be performed before the machine is delivered to the customer for safe operation.
Outlines the initial maintenance checks and actions required after the first 8 hours of machine operation.
Identifies and explains the function of each control and component on the machine's operating panel.
Provides general safety guidelines and warnings to prevent injury and ensure safe operation of the machine.
Details essential safety practices for operating the machine, including understanding controls, user age, and clearing the work area.
Offers critical advice and precautions for safely operating the machine on sloped terrain to prevent accidents and overturning.
Warns about the dangers posed by children around the machine and provides instructions for ensuring their safety.
Outlines crucial safety precautions to be taken before and during maintenance procedures to prevent injury and damage.
Provides essential safety information and instructions for properly securing the machine during transport to prevent accidents and damage.
Congratulates the customer and introduces the machine's features and design, referencing the operator's manual.
Explains the procedure for applying and releasing the parking brake to secure the machine when stopped.
Describes how the speed of the machine is regulated using two pedals for forward and backward movement.
Details the function of the throttle control for engine speed and the choke for cold starting.
Describes the Combi-unit, its mulching function, and its operation as a rear ejection unit.
Explains how to use the lifting lever to move the cutting unit between transport and mowing positions.
Explains how to adjust the cutting height of the unit through multiple positions using a lever.
Describes the seat's attachment and adjustment features for operator comfort and positioning.
Provides instructions on safely fueling the machine with the correct type of unleaded petrol and precautions.
Explains how to use the release lever to move the machine when the engine is shut off.
Details the operation of the release levers for the front and rear axles on the 4x4 model for disengaging drive.
Lists essential checks and preparations required before starting the engine and operating the machine.
Provides a step-by-step guide on how to safely start the engine, including cold and warm start procedures.
Explains how to safely jump-start the machine using another vehicle's battery, with important warnings.
Details how to release the parking brake, control speed with pedals, and select cutting height for operation.
Outlines the correct procedure for safely stopping the engine and securing the machine after use.
Presents a comprehensive schedule of daily, annual, and interval-based maintenance tasks for the machine.
Provides instructions and recommendations for cleaning the machine after use to prevent rust and maintain performance.
Explains how to remove the engine cover, front cover, and side fenders for access to internal components.
Advises on checking the muffler's condition and security, with warnings about its high operating temperature.
Describes how to check and adjust the tension of the steering wires to ensure proper steering alignment.
Details the procedure for adjusting the parking brake to ensure it holds the machine securely on slopes.
Explains how to adjust the throttle cable for optimal engine response and performance.
Provides step-by-step instructions for replacing the air filter to maintain engine power and smooth running.
Guides on how to replace the fuel filter at recommended intervals to ensure proper fuel delivery to the engine.
Advises on checking and cleaning the fuel pump's air filter for optimal fuel system performance.
Specifies the correct tyre pressure for all wheels and mentions adjusting rear tyre pressure for improved drive.
Focuses on the maintenance of the spark plug, including replacement and gap adjustment for engine ignition.
Identifies the location and type of the main fuse and explains how to replace a blown fuse to protect the electrical system.
Explains how to check the machine's safety interlock systems to ensure they function correctly before starting or operating.
Details how to clean the engine's air intake grille and duct to ensure adequate cooling and prevent engine damage.
Guides on checking tyre pressure and adjusting the cutting unit's ground pressure for optimal cutting results.
Explains how to check the cutting unit's parallelism to ensure a level cut and proper blade alignment.
Provides instructions for adjusting the cutting unit's parallelism for optimal cutting performance.
Details the procedure for placing the cutting unit in a service position for easy access during cleaning, repairs, and servicing.
Emphasizes the importance of checking blades for damage and sharpness for optimal mowing results and safety.
Provides step-by-step instructions for safely removing and replacing the cutting blades, including torque specifications.
Explains how to remove the mulching plug to change the Combi unit from mulching to rear ejection mode.
Instructs on how to check the engine oil level when the machine is horizontal and the engine is off.
Details the procedure for changing the engine oil, including frequency, draining, and refilling with correct oil type.
Provides instructions for replacing the oil filter at recommended intervals for engine protection.
Explains how to check the transmission oil level and identifies the correct oil types for different models.
Details the procedure for lubricating the belt adjuster using specific grease for proper function.
Covers general lubrication points for joints, bearings, and control wires using specified greases and oils.
Provides detailed instructions on preparing the machine for long-term storage, including fuel treatment, cleaning, and battery care.
Mentions a cover for protection during storage or transport and advises contacting the dealer for a demonstration.
Recommends performing service during the low season and emphasizes using genuine parts and annual check-ups by an authorized dealer.
Declares the machine's compliance with relevant European directives and harmonised standards.
To Next Page
