Joovv Mini - Plug in Power and Set Time

Plug the two power cords into a wall outlet. The
devices will automatically pair.
STEP 7
The lead device will show the default treatment time
of 10 minutes. To adjust the treatment time, press
the “Time” button on the control panel to add time in
one-minute increments up to 20 minutes. The timer
will cycle back to 1 minute after the time exceeds 20
minutes on the display.
STEP 8
Red Infrared
TIME
MODE
FIG. D
Optional Mounting Systems
(2 people required)
SETTING UP YOUR JOOVV QUAD
6.13