Joovv Mini - Prepare Hardware and Hang Door Hook

Lay all of the included hardware, including your
Joovv, on a padded surface. Next, screw in the
threaded posts to the top of the device and hand-
tighten with the included Allen wrench. Then, screw
the cable supports to the threaded posts, as shown
in Figure A.
STEP 1
FIG. A
Hang the included custom hook on any standard-
sized door, as shown in Figure B.
STEP 2
FIG. B
SETTING UP YOUR JOOVV SOLO & JOOVV MINI
4.2