Joovv Mini - Connect System and Adjust Height

Connect the cable supports to the snap link attached
to the height-adjusting system. Then, connect the
snap link on the opposite end directly to the door
hook, as shown in Figure C.
STEP 3
FIG. C
To raise your Joovv to your desired height, pull down
on the loose cable while supporting the device with
your opposite hand, as shown in Figure D.*
*Caution: Be sure to adequately support the device
while raising and lowering it with the height-
adjusting system.
STEP 4
FIG. D
SETTING UP YOUR JOOVV SOLO & JOOVV MINI
4.3