To lower your Joovv, push up on the lever in the
height-adjusting system while supporting the device
with your opposite hand, as shown in Figure E.*
*Caution: Be sure to adequately support the device
while raising and lowering it with the height-
adjusting system.
Plug the power cord in the female power socket
located on the back of the device and then plug the
other end into a wall outlet. Turn the pairing switch
to “Neutral” mode and then turn the power switch
on, as shown in Figure F.
Lead Mode
Neutral
Follow Mode
FIG. F
SETTING UP YOUR JOOVV SOLO & JOOVV MINI
4.4