Jorvik JET-E2 Elite Mid-Drive Dual Battery Electric Folding Tricycle
8
How To Assemble This Tricycle
Assembly Instructions
5. Insert the quick release skewer & turn the skewer adjusting
nut clockwise to tighten it. Keep turning the adjusting nut
until you see or feel the nut contact the face of the dropout.
6. Next, try closing the lever. Your goal is to tighten the
adjusting nut enough so that the lever can be fully closed
and closing it requires signicant force. You want it to be
hard to close, you want to see a lever mark on your hand.
If the lever is not hard to close, hold the lever and further
tighten the adjusting nut, try again. If not possible to close
or its very, very hard to close, hold the lever and slightly
loosen the adjusting nut, try again. Towards the end of the
adjustment process, quite small changes, like ½ turn, of
the adjusting nut are necessary. Your goal is to tighten the
adjusting nut enough so that the lever can be closed but
requires signicant force to close. You want it to be hard to
close, you want to see a mark on your hand.
To Next Page
Loading...
