Jorvik JET-E2 Elite Mid-Drive Dual Battery Electric Folding Tricycle
7
How To Assemble This Tricycle
Assembly Instructions
Your trike has been pre-assembled. It requires only a few
simple steps to get it ready for your rst ride.
1. Remove the outside carton after cutting the nylon bands
and taking off the lid. Carefully remove your trike from the
box and gently rest it in place.
2. Remove all of the inside cardboard protection and bubble
wrap.
3. Locate and set aside the kit box containing the pedals, this
user’s manual, and tool kit.
4. Install the front wheel by lining up the disc brake and place
the fork of the trike onto the front wheel.
Continued overpage...
To Next Page
Loading...
