Jorvik JMT6 Low Step Through Electric Mountain Trike
14
The Seat
Make sure that the seat is tight enough so that you can’t twist it out of alignment. Pull the seat clamp handle away from
the seat post and slide the seat up to down to adjust it. Move the clamp handle inward toward the seat post so it is held
tight by the clamp.
This should require a fair amount of force to ensure the seat post is held tight.
Turning the bolt clockwise will increase the clamping force and counter clockwise will decrease the clamping force.
Make sure the seat is not set with the vertical maximum height marks above the clamp.
How To Assemble This Tricycle
To Next Page
Loading...
