jotron MPA 1605 PAGA User Manual

12
User and Installaon Manual
Compact MPA
2.9 LOUDSPEAKERS
A PA/GA system like the Compact MPA will ulize a wide variety of loudspeakers in the distribuon network. Consideraons
such as environment, topology and sound pressure requirement will determine what kind of loudspeaker type and size
should be used in the specic areas.
To comply with the environment requirement all loudspeakers used in a PA/GA system must be approved according to
relevant parts of IEC60945 or similar.
The topology and sound pressure requirement will be decisive for the number of loudspeakers in the dierent areas, the
loudspeaker type, their power rang and tapping.
See secon 5.2.3 for detailed loudspeaker selecon informaon.
3 TECHNICAL DATA
3.1 MPA 1600 OPERATION UNIT
19" 1 Unit rack mounng unit.
Operang voltage: Dual 24VDC – primary (AC through integrated Power supply module) / backup
Current drain maximum: 5A
Microphone input level: 5mV.
External PA input level: 0 dBu typical (congurable)
External entertainment input level: 0 dBu typical (congurable)
Audio outputs to ampliers: 0 dBu typical (congurable)
Size: 44 x 483 x 206 mm (HxWxD)
Weight: 3 kg
Ingress Protecon (stand-alone) (IP): 22
Compass safe distance: Ref Cabinet data
3.2 MPA 1601 PA CONTRON UNIT
Outer dimensions: 144 x 144 mm.
Operang voltage: 24VDC supplied from the MPA1600 Operaon Unit.
Current drain maximum: 300mA. (integrated in the MPA 1600)
Microphone input level: 10mV typical (dynamic mic.)
Ingress Protecon (IP): 44
Compass safe distance (standard) 80 cm
Compass safe distance (steering) 50 cm

jotron MPA 1605 PAGA Specifications

General

Brand	jotron
Model	MPA 1605 PAGA
Category	Marine Equipment
Language	English