To Next Page
R
Robert FrederickAug 17, 2025
What to do if my Jotron Transmitter shows an alarm?
- DdcardenasAug 17, 2025
If your Jotron Transmitter is showing an alarm, it indicates a failure in one of its modules or components. Possible causes include a failure on the PA module (check PA module), Modulation module (check Modulation module), Front Module (check Front module), or Main Module (check Main module). It could also be due to a failure communicating with the ethernet_PHY, codec, front module, rem expander, or bite adc, or a failure on the spi bus, or an Internal DSP failure; in these cases, check the Main board. You may also check TX BITE menu chapter 1.3 for abnormal readings.
General
