jotron TA-7650C Maintenance And Repair Manual

85894_M&R_TA7650C_A 3
LAN
Local Area Network
I.ED
Light Emitting Diode.
ORC
Operators Remote Control. With the ORC it is possible to select frequencies, which are stored in the channel
memory of the radio. To ease the operation, channel names can be used for each frequency. The ORC requires a
separate line pair that is connected to the serial interface of the radio. Several ORC units may share the same
line.
PA
Power Amplifier
PSU
Power Supply Unit. Separate unit to power the equipment.
PTT
Push To Talk
RESET
To return stored values to either the default value or zero in memory.
RF
Radio Frequency
R/O
Read only
R/W
Read and Write
SIGNAL- TO-NOISE RATIO (S/N)
Quantitative relationship between the useful and non-useful part of the received signal. A high S/N indicates a
good receiving condition.
S/N
See SIGNAL- TO-NOISE RATIO
SNMP
Simple Network Management Protocol
This equipment is defined as an AGENT in an SNMP system.
SOFTWARE
Values programmed and preloaded into memory. The values represent a permanent set of instructions for
running the automatic functions (computations) of the unit.
UHF
Ultra High Frequency; A set of frequencies in the upper MHz region.
VHF
Very High Frequency; A set of frequencies in the lower MHz region.
VSWR
Voltage Standing Wave Ratio.

jotron TA-7650C Specifications

General

Brand	jotron
Model	TA-7650C
Category	Radio
Language	English