26
6.2 Battery charging
6.2.1 After use, carefully check the LED with charging bar on control panel to
determine whether it needs to be charged.
6.2.1.1 This electric scooter can be charged with a charger with an output of
29.2Vdc 2A. In order to ensure your safety, please use the charger for electric scooters
provided by the manufacturer.
6.2.2 Charging
6.2.2.1 The first charge: It is not necessary to charge the battery for the first time. Start
charging when the LED shows red. The same is true for the second and third charge. This
prolongs the battery life and eliminates the charging memory of the lithium battery.
6.2.2.2 Charging
(1) Charging method I: Remove the battery box and charge the battery off board.
Battery must be in the “ON” position for proper charging.
(2) Charging method II: Charge at the tiller port on the control panel. If charging from
the front port, the unit must be switched “OFF”, and the battery must be “ON” for
proper charging.
(Charging method I) (Charging method II)
Caution! When charging, the switch on the battery box should be in
ON position; that is, charging is performed when the power is turned on.
OFF
ON
LITHIUM BATTERY AND CHARGING
To Next Page
Loading...
Need help?
General
