Joyetech eVic VTwo User Manual

39
INNOCIGS EVIC VTWO – EXPLANATIONS TO THE VAPING MODES
VW mode (Variable Wattage)
VT mode (Variable Temperature) | TEMP NI, TEMP TI, TEMP SS316
When set in VW mode, the device can support a coil whose resistance is within the range of 0.1 ohm and 3.5 ohm. In VW mode
the output wattage can be adjusted – according to the used coil – from 1 W to 80 W by turning the control knob to the right or
to the left. Long pressing the control knob to the right or to the left rapidly increases or decreases the wattage level.
When set in TEMP NI, TEMP TI or TEMP SS316 mode, the device can separately support Nickel 200, Titanium (Ti) and
316 Stainless Steel coils. When set in one of the VT TEMP modes, the device supports a coil resistance within the range of
0.05 ohm and 1.5 ohm. In VT mode the vaping temperature can be adjusted – according to the used coil – in a range between
200°F and 600°F by turning the control knob to the right or to the left. Long pressing the control knob to the right or to the
left rapidly increases or decreases the temperature level.

Joyetech eVic VTwo Specifications

General

Brand	Joyetech
Model	eVic VTwo
Category	Electronic Cigarettes
Language	English