JPS NXU-2B - Page 39

NXU-2B Operations Manual
3-11 Interoperability Now!
GATEIP <ip address> - Set gateway IP address for this unit
HANGTM <time> - Set VOX hang time to 500, 1000, 2000, 3000, or 4000 ms
MAC – Return the Ethernet MAC address of this unit
MYIP <ip address> - Set the IP address of this unit
NAME <text description> - Give this unit a name
PARITY <O/E/N> - Set the serial port parity to Odd, Even, or None
PASS <password> - Assign a password for web access
PORT <port number> - Set the IP port used by this unit
REBOOT - Restart this unit
SAVE - Save NXU-2B settings to FLASH memory and restart
SECURITY <security level> - Set the security level (0-255)
SRVRIP <ip address> - Set the IP address of the NXU-2B server
SRVRPORT <port number> - Set the port where to send VOIP traffic
STAT - Return this client's current connection status
STOP <1/2> - Set the serial port stop bits
SUBNET <ip address> - Set IP subnet mask for this unit
TRAN - Place this unit's serial port in transparent mode
VER - Print the software version information for this unit
VOCODER <number> - Select the voice compression method (1-5)
WHAT - Print a description of this unit's settings
BOOST <0/1> - Select either no boost (0) or +20 dB boost (1) on audio input
RXDELAY <0-9999> - Set the received audio delay in milliseconds
TXDELAY <0-9999> - Set the transmitted audio delay in milliseconds
RXLEVEL <1-37> - Sets expected audio RX level (1-37) as follows:
1 (+10dBm) to 37 (-26dBm) in 1 dBm steps. 11 = 0dBm.
TXLEVEL <number> - Sets desired audio RX level (1-37) as follows:
1 (-26dBm) to 37 (+10dBm) in 1 dBm steps. 27 = 0dBm.
VSENSE <0/1/2> - set the VOX/VMR sensitivity to low (0), medium (1), or high (2)