JR PCM9X II - Sailplane Mixing Functions; Travel Adjust; Elevator-to-Flap Mix

www.modelflight.com.au – World’s best source of JR products
Step #22-
A
ile
r
on-
t
o-
R
udde
r
Mix- Launch Mode
In FUNC. L IST rotate the Selector until A I L ⁄ RUD M is
highlighted. Press the Selector to access the Aileron-to-
Rudder mix menu. Rotate the Selector to highlight the
launch left value then press the Selector to access that
value. With the flight mode switch in the upper launch
mode, give a full left aileron command and rotate the
Selector to achieve the desired left rudder throw.
Pressing the Selector will store the value. Now rotate
the Selector to highlight the launch right value and
adjust it to the desired position. Press the LIST button
to return to the Function Mode screen.
Sail
p
lane P
r
o
g
r
ammin
g
Guide 16