JRC JHS-183 - Page 47

PREPARATION FOR INSTALLATION
2-13
1.
Ship’s information
Ship’s name Survey Date
Flag Survey Place
G/T Presented by
Ship Type
Written by
Company
Name
Class
IMO No. Sea Area [ ]A1, [ ]A2, [ ]A3, [ ]A4
MMSI Call Sign
2. Present Installation
Power supply Type Fitting Capacity
Main Generator VAC kVA φ Hz
Emergency Generator [ ]yes ,[ ]no VAC kVA φ Hz
Batt. 24VDC AH
Reserve Batt. Radio Batt 24VDC AH
Equipment Model / Maker
(D)GPS Receiver
- Required position data
based on WGS-84 datum
reference.
Type:
Maker:
Signal type: Port:
Ant position: From Bow m, From stern m
Height m, Starboard m, Port m
Gyro Compass
Type:
Maker:
Signal type:
Doppler Log (If equipped)
-
A
vailable only Speed Over
Ground data
Type:
Maker:
Signal type:
ROT Sensor (If equipped)
Type:
Maker:
Signal type:
GPS Buffer (Option)
Type:
Maker:
Signal type: Output port: