JRC JHS-183 - Back Side of the Controller and Connectors

INSTALLATIONS
3-15
3.1.2.2 Back side of the controller and connectors
(1) GND
Connect the terminal to the Ship ground.
(2) TRANSPONDER
N-type connector which is connected to the AIS transponder
(3) 24VDC/DATA1
Connect the control cable (CFQ-9183A/D/F) for DC power source input and communication with
external units
No. Name No. Name
1 24V+ 8 SENSOR2; GND-ISO
2 24V- 9 AUX1; TX-A
3 SENSOR1; RX-A 10 AUX1; TX-B
4 SENSOR1; RX-B 11 AUX1; RX-A
5 SENSOR1; GND-ISO 12 AUX1; RX-B
6 SENSOR2; RX-A 13 AUX1; GND-ISO
7 SENSOR2; RX-B 14 GND(SHEILD)
Connectors for option cable
(1)
(2)
(3)
A
B
C
D