INSTALLATIONS
3-25
AUX connection
Parallel connection of the AUX output port
AUX 1 to 4 are equipped with an additional pair of terminals to allow two devices to be connected in
parallel.
Therefore, each AUX output can be connected with two devices.
Connect Shield braided
wires to the ground
RADAR
TTYCS-4
RADAR
VHF1
These ports are the output
only ports for AUX.
Connect to device to monitor
the AIS data.
These are the input-output
ports for AUX.
Connect to device to
communicate with the AIS
bi-directionally.
To Next Page
Loading...