[III] Status display (Status)
The current Target Tracking status will appear.
Procedures 1 Press the [TT MENU] key.
2 Open the TT Test Menu by performing the following menu operation.
9. TT Test Menu
3 Press the [3] key.
The setting items for Status will be displayed.
*Constant : Vector response
*VID Level TD : Threshold value used for automatic
acquisition
*VID Level High : Threshold value used for tracking
*VID Level Low : Unused
*Gate Size : Size of gate used for tracking
*Tracking : Number of targets currently acquired
5-29
To Next Page
Loading...
