JRC JMA-7133-SA - Edit Route Make with Latitude and Longitude (Waypoint Input)

JMA-7100 Instruction Manual > 3.BASIC OPERATION > 3.7 USE ROUTE FUNCTION
3－75
3
3.7.3 Edit Route Make with Latitude and Longitude (Waypoint
Input)
In this radar system, it is possible to create and correct route by performing
operation on the Waipoint Input menu.
3.7.3.1 Open the Waipoint Input Menu
Procedures
1) Open the Waypoint Input menu by performing the menu
operation below.
→
→
When transmitting, it can not be open.
Waypoint Commen
t
Waypoint
Latitude/Longitude
Waypoint Number
Input CharacterExit
Planned SpeedWaypoint Scroll
Waypoint Scroll Waypoint
Insert
Waypoint
Addition
Waypoint
Delete
Route
2. WPT/Route Setting
6. Waypoint Input