8－34
JMA-7100 Instruction Manual > 8.COUNTERMEASURE FOR TROUBLE ... > 8.4 REPLACEMENT OF MAJOR PARTS
8.4.4 Replacement of LCD Monitor
8.4.4.1 Display Unit NCD-4790
Do not touch the LCD screen directly with your fingers.
Do not touch the AR filter directly with your fingers.
Perform the replacement work on a soft cloth to avoid damage to the LCD screen and
other parts.
[Required tools]
A Phillips screwdriver for 4 mm screws
A Phillips screwdriver for 6 mm screws
A pair of nippers
[Disassembly]
1) Remove the screws (M6) from the four
corners and displace the face cover. Remove
the LCD operation circuit cables and remove
the face cover
Replacement of LCD monitor must be made by specialized
service personnel.
For details, refer to Service Manual.
Remove
To Next Page
Loading...
