JRC JMR-5410-4X - Page 409

13-37 Section 13 Setting up the Operation Mode
１
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
APP A
APP B
User Key list
The following table shows the functions that can be assigned to user keys.
Function Description
Show Preset Menu Display the pre-registered screen.
By displaying a screen to be registered and holding down the key to
which [Show Press Menu] is assigned, the screen can be
registered/cancelled. A screen can also be registered from the combo
box (User) that is displayed on the title bar on each screen. When “Off”
is selected in the item of the combo box, the registration is cancelled.
Combo box Status
Indicates that the screen is assigned to the
user key (User [number that is assigned])
Indicates that the screen is not assigned to
the user key.
Show Favourite Display the favourite list screen.
Zoom Enable/disable the Zoom function.
Capture Screen Execute screen capture.
Show Geodetic Display the geodetic system display screen by selecting [Settings] –
[Geodetic].
Clear Target Track Clear other ship’s track by selecting it.
Clear Mark/Line Clear a mark/line. Select the mark/line on the setting screen that is
displayed by pressing the [Detail] button.
Plot Event Mark Enter an event mark on the own ship’s position. Select the event mark
on the setting screen that is displayed by pressing the [Detail] button.
Plot Mark
Enter a mark on the cursor position. Select the mark to be entered on
the setting screen that is displayed by pressing the [Detail] button.
Select Obs. Scene
Select an observation scene that was set. Select the observation scene
on the setting screen that is displayed by pressing the [Detail] button.
Load User Setting (Obs.
Scene)
Execute [Settings] – [Obs. Scene Preset] – [Load User Setting] for the
observation scene that is currently selected by the user.
Add Reference Mark
Add any reference mark on the cursor position. This item can be used
in synthesis mode only.
Record Operation
(Macro name)
Reproduce the key operation that was registered by [Record
Operation].
TM Reset Execute the TM reset function
PRF Fine Tuning Increment by 1, the setting of [Settings] – [TXRX] – [PRF Fine Tuning].
Acquire Perform the same operation as the acquisition key of the multi-function
operation unit.
Readout Information Perform the same operation as the numeric key of the multi-function
operation unit.
Clear Execute the Clear function for the object under the cursor.
Close All Dialogue Close all the dialogues/menus that are displayed on the screen.