JRC JMR-7210-6X - Setting up the Collision Determining Condition

5.2 Setting Up the Collision Determining Condition
5.2.1 Setting Up the CPA Limit
1 Click the CPA Limit Value entry box.
The software keyboard is displayed.
2 Enter a CPA limit value.
For the input method, please see "6.3 Operating with the Software Keyboard".
5.2.2 Setting Up the TCPA Limit
1 Click the TCPA Limit Value entry box.
The software keyboard is displayed.
2 Enter a TCPA limit value.
For the input method, refer to the section "6.3 Operation with the Software Keyboard".
CPA Limit Value
Entry Box
TCPA Limit Value
Entry Box
24