JRC JMR-9225-9X3 - Displaying the AIS Information; Deactivating an AIS Target

4.3 Displaying the AIS Information
1 Set the cursor mode to the AUTO mode.
2 Position the cursor on the activated AIS target of which you want to display AIS target
information and then click.
The information of the selected AIS target will be displayed in the right part of the screen.
4.4 Deactivating an AIS Target
1 Right click after moving the cursor over the AIS activated target to be deactivated.
The context menu will be displayed.
2 Click “Deactivate” in the context menu.
The selected activated AIS target will be deactivated.
22