JRC JQE-103 - Installation Outline; EPIRB Main Unit Mounting Procedure

2-2
This unit may be damaged due to vibration. Do not absolutely install this unit in an extremely
vibrating place such as a handrail.
This unit must not be installed in a place where a strong magnetic field is generated. The Satellite
EPIRB may activate by the magnetic force.
The Satellite EPIRB must be installed apart from the compass and so for the 2 meters or more so that
the magnetism is not influenced. The magnet in the automatic release bracket may affect the
compass and so forth.
2-3 Outline of installation
Install the Satellite EPIRB main unit to the automatic release bracket confirming followings.
(1) Selector switch is set to “READY” position.
(2) Stopper pin is not broken.
Fig.2-3 Satellite EPIRB main unit and automatic release bracket
A
ntenna
Stopper pin
Stoppe
r
Selector switch
WARNING