4-9
4
4-7-3 Necessary procedure for Satellite EPIRB installed in the vessel to be resold
In case of that Japanese flag vessel is resold to Japanese client and new owner succeeds
in the radio station license.
(Contact t the purchasing dealer, JRC agent or one of the JRC branches, and ask them to take necessary
procedure and work as mentioned below.)
(1) To avoid accidental emission, make sure that the switch position of Satellite EPIRB is set to “READY”,
that the switch is fixed by the stopper, and that the Satellite EPIRB main unit does not get wet. Then, store the
proper place until new ID code is available.
(2) Submit the necessary document for the continuous usage of radio station license concerning to Satellite
EPIRB to the managing organization, following to the Japanese regulation.
(3) When the document is approved, make sure MMSI protocol and rewrite ID code and the name of vessel to
new one and then, install the Satellite EPIRB on proper place referring to the manual.
In case of that Japanese flag vessel is resold to Japanese client and new owner does not
succeed in the radio station license.
(Contact the purchasing dealer, JRC agent or one of the JRC branches, and ask them to take necessary
procedure and work as mentioned below.)
(1) To avoid accidental emission, make sure that the switch position of Satellite EPIRB is set to “READY”, that
the switch is fixed by the stopper, and that the EPIRB main unit does not get wet. Then, store the Proper
place until it is disposed.
(2) Submit the necessary document for the abandonment of radio station license concerning to
Satellite EPIRB to the managing organization, following to the Japanese regulation.
(3) Contact the purchasing dealer, JRC agent or one of the JRC branches, and ask them to take necessary
procedure and work for the disposal of the Satellite EPIRB.
In case of that Japanese flag vessel is resold to overseas (outside of Japan) client.
(Contact the agent, the dealer, the service shop or the manufacturer which supplied the Satellite EPIRB, and ask
them to take necessary procedure and work as mentioned below.)
(1) To avoid accidental emission, make sure that the switch position of Satellite EPIRB is set to “READY”, that
the switch is fixed by the stopper, and that the Satellite EPIRB main unit does not get wet.
Then, store the proper place until new ID code is available.
(2) Submit the necessary document for the continuous usage of radio station license concerning to
Satellite EPIRB to the managing organization, following to the Japanese regulation.
(3) Make sure if the EPIRB has the effective type approval at new nationality, or if the Satellite EPIRB is
permitted for usage without effective type approval at new nationality. The Satellite EPIRB installed in
Japanese flag vessel has HK type approval.
(4) Confirm that whether the explanation displayed in Satellite EPIRB main body is written in English or not
(ask the disposal to purchasing dealer, JRC agent or one of the JRC branches when the Satellite EPIRB
To Next Page
Loading...
