Need help?Do you have a question about the JTECH GuestCall Coaster J1707 and is the answer not in the manual?
Describes charging status indicators (LO, Flashing BLUE, Solid BLUE) and charging time.
Instructions for giving a pager to a guest and its initial demonstration.
Steps for paging a guest using the transmitter and how the pager alerts.
Details the default settings applied to the paging system prior to shipment.
Guide to adjusting the current time setting on the transmitter.
How to use the feature to locate misplaced pagers by making them signal.
Procedure to enable or disable the pager alert when it is out of transmitter range.
Steps for combining multiple pagers into a single group for sequential paging.
Steps for removing a specific pager from an existing group.
Guide to testing the transmitter's signal range with pagers.
Process to renumber and configure pagers using the Smart Charger.
Instructions for integrating JTECH pagers with the Host Concepts waitlist application.
Information on expected battery life, replacement, and troubleshooting battery issues.
Steps for obtaining a repair form, shipping pagers, and company responsibilities.
Information on licensing requirements for using JTECH systems outside the US.
To Next Page
General
