Need help?Do you have a question about the JTECH ServerCall J1703 and is the answer not in the manual?
Describes how servers use the paging system for shifts and order pickup.
Explains single, double, or triple vibration patterns for different notifications.
Details default system settings applied before shipment, including time and range.
Step-by-step guide to setting the current time on the transmitter.
Instructions to enable and set the transition page time between re-pages.
Guide to enable manager notification for unacknowledged pages.
Procedure to activate or deactivate the pager out-of-range alert feature.
Steps to test the transmitter's effective range with pagers.
Process to renumber and configure pagers using the smart charger.
Instructions for programming replacement pagers for lost units.
To Next Page
General
