ServerCall Paging, Rugged Staff Pagers
Model Number: J1703, J1704
Transition Page (Default: 30 seconds)
The transition page is the time between Re-Page. There are three options:
> Page the server 1x and reset.
> Page the server 3x.
> Pager the server 3x and page the manager, requires a manual reset.
To Set (Default: ON – 30 seconds)
> Scroll to TRANSITION PAGE
> Press the 2X or 3X to turn ON.
> Press ENTER to set the transition time
> Press the 2X or 3X to scroll through the time options (15, 30, 45, 60, 120 seconds).
> Press ENTER to save the desired selection
> Press CANCEL to exit
Set Manager Page
> Scroll to SET MANAGER PAGE
> Press the 2X or 3X to turn ON.
> Press ENTER to save
> Press CANCEL to exit
Out of Range (Default: OFF) applies to rechargeable pagers only
With this feature, the pagers will signal when taken out of range of the transmitter to inform the staff that they are
too far away and will miss their page. The alert will automatically stop when they step back within range.
Turning the Out of Range On/Off
> Ensure all pagers are within range.
> Scroll to OUT OF RANGE.
> Press 2X or 3X to turn ON
> Press ENTER and follow each of the 4 prompts.
> Pagers will light up once they have received the command.
> Press CANCEL to exit
To Next Page
Loading...
