Camcorder XLR Adapter/Preamp/Mixer User’s Manual Page 15
Power
Power Sequence
- Place an alkaline 9V battery in the tray. Make certain to use the correct orientation.
- Turn on the power by sliding the PWR switch to the On position.
- The “ON” LED will now be illuminated.
- Turn off the power when not in use to conserve the battery.
- The low battery indicator LED (Low Batt) will illuminate when the battery supply needs to be changed. The
threshold has been preset for use with alkaline 9V batteries.
Rechargeable Batteries
It is not recommended to use the unit with rechargeable batteries. The low battery indicator has been calibrated for
use with alkaline 9V batteries. Other battery types will not illuminate the low battery indicator the appropriate
voltage for that type of battery.
To Next Page
Loading...