JUKI APW-895/IP-420 - Using the Information

− 79 −
15. USING THE INFORMATION
There are three functions below, in the information function.
A
Maintenance inspection information
Oil replacement (grease-up) time, needle replacement time,
cleaning time, etc. are specified, and when the specified
time has passed, the warning notice can be performed.
See
“
^
-15-(1) Observing the maintenance inspection
information” p.80
.
B
Production control information
By means of function to display target production and
actual production, the target achieving consciousness of a
line or a group is enhanced and also the progress can be
conrmed in one glance.
See
“
^
-15-(3) Observing the production control infor-
mation” p.82
and
“
^
-15-(4) Performing setting of the
production control information” p.84
.
C
Operation measurement information
I
nformation on machine operating situation, machine op-
erat
ing rate, pitch time, machine time, and machine speed
can be displayed.
See
“
^
-15-(5) Observing the operation measurement
information” p.86
.
1
Display the information screen
Press
INFORMATION key
A
of the switch seat section in
the input screen and the information screen (screen A) is dis-
played.
Information screen
(screen A)
C
A
B
A