JUKI CP-170 - 5. HOW TO OPERATE THE CONTROL PANEL FOR SEWING STITCHING PATTERNS; Reverse stitching pattern

- 4 -
ENGLISH
1) Press reverse stitching pattern switch
1
to
specify the reverse stitching pattern.
2) The reverse stitching pattern is selected, and the
number of stitches and data on reverse stitching
which have already been specied are shown on
the panel.
3) If you want to change the number of stitches,
operate the " + " or " - " switch of switches
4
for
setting the number of stitches A through D.
The range of the number of stitches that can be
changed : 0 to 19 stitches
4) Four different stitching patterns can be
performed by matching the ON and OFF settings
of automatic reverse stitching (for start) switch
2
and automatic reverse stitching (for end) switch
3
.
5) Furthermore, the double reverse stitching can be
selected by operating double reverse stitching
(for start) switch
5
and double reverse stitching
(for end) swit6ch
6
.
(1) Reverse stitching pattern
5. HOW TO OPERATE THE CONTROL PANEL FOR SEWING
STITCHING PATTERNS
2
OFF
ON
OFF
ON
Sewing pattern
A
B
D
C
D
C
A
B
3
OFF OFF
ON ON
5 2
6 3 41