JUKI DSC-246 - Thread the Machine Head; Adjusting the Stitch Length; Forward;Reverse Seam Ratio

– 6 –
[ For the DSC-246-7, DSC-246V-7 ]
Thread the machine head in the order of
1
through to
!5
.
(Caution) For section
!2
, pass the thread on the left side of
the needle.
[ For the DSC-246, DSC-246V ]
Thread the machine head in the order of
1
through to
!2
.
10
WARNING :
To protect against possible personal injury due to abrupt start of the machine, be sure to start the following work
after turning the power off and ascertaining that the motor is at rest.
WARNING :
To protect against possible personal injury due to abrupt start of the machine, be sure to start the following work
after turning the power off and ascertaining that the motor is at rest.
9
11
– 7 –
WARNING :
To protect against possible personal injury due to abrupt start of the machine, be sure to start the following work
after turning the power off and ascertaining that the motor is at rest.
12
13
14