– 25 –
Turn ON the power switch
When the power is turned ON rst, the language selection
screen is displayed. Set the language you use. (It is possible
to change with Memory switch .)
When ending the selection screen with CANCEL button
or ENTER button without performing the
language selection, the language selection screen is
displayed whenever the power is turned ON.
Select the pattern No. you desire to sew.
When the power is turned ON, the data input screen is dis-
played. Pattern No. button
whichs selected at present is
displayed in the center of the screen. Press the button to select
the sewing shape. For selecting procedure of the sewing shape,
refer to "II-2-5. Performing sewing shape selection" p.31 .
When READY key
is pressed, the back color of LCD
display is changed to green, and the sewing machine is set to
the sewing possible state.
2-3. Basic operation of IP-420
To Next Page
Loading...
Need help?
General
