JUKI MEB-3810 User Manual

– 39 –
2
7
6
6-3. Temporarily stopping the sewing machine
■
How to stop the sewing machine
1)
Press temporary stop switch
1
.
2)
The sewing machine stops and “E050” is displayed.
■
How to re-start
1)
While "E050" is shown on the screen, press
RESET key
2
to release the error and to
r
estore the screen to the display before the oc-
currence of the error.
2)
Re-start the sewing machine using the start
switch, or press –/BACKWARD key
6
or
+/FORWARD key
7
and the feed mecha-
nism travels forward/backward stitch by stitch.
F
urther, press RESET key
2
to return the
sewing machine to the sewing start position.
1. Operation of –/BACKWARD
6
key, +/FORWARD
7
key or RE-
SET key
2
cannot perform thread
trimming.
2.
When temporarily stopping the sewing
machine during sewing and returning
the sewing machine to the start posi-
tion
with RESET key
2
, draw out
needle thread, cut the thread with scis-
sors or the like and perform the work.
Th
e work can be performed without
applying a forced load to needle or
sewing product.
1

JUKI MEB-3810 Specifications

General

Brand	JUKI
Model	MEB-3810
Category	Sewing Machine
Language	English