JUKI MO-1000 - Adjustments and Settings; Stitch Length Adjustment

22
Adjustments and settings /
缝迹长度的调整
Stitch length
It can be adjusted while sewing.
The stitch length is innitely variable from 1-4mm. Most overlock work is
done with a basic setting of 2.5mm.
For roll hemming or narrow overlocking, it is best to set the dial at “1 to 1.5”.
For blind stitch which requires the “use of separately-available presser
foot”, set the dial at “4”.
缝迹长度
通过送布调节旋钮即可调整。
即使是在缝制中也可在【1 ～ 4】的范围内进行调整。
普通的包边缝以【2.5】为基准。
全卷边缝，窄边包缝以【1 ～ 1.5】为最佳。
进行绕缝使用另售压脚时要调整为【4】。