JUKI MO-1000 - Stitch Chart

30
Stitch Stitch width Thread tension Basic settings
4-Thread overlock with
integrated safety seam
5-9 mm,
right and left needles
Left needle (beige) 3-5
Right needle (green) 3-5
Upper looper (purple) 3-5
Lower looper (red) 3-5
Stitch length: 2.5
Cutting width: 1-5
Differential: N-2 (knits)
0.7-N (wovens)
3-Thread super stretch
5-9 mm,
right and left needles
Left needle (beige) 3-5
Right needle (green) 3-5
Lower looper (red) 1.5-4
Stitch length: 2-2.5
Cutting width: 1-5
Differential: N-2 (knits)
0.7-N (wovens)
Upper looper converter
3-Thread overlock
5-9 mm, left needle
Left needle (beige) 3-5
Upper looper (purple) 3-5
Lower looper (red) 3-5
Stitch length: 2.5
Cutting width: 1-5
Differential: N-2 (knits)
0.7-N (wovens)
3-7 mm, right needle
Right needle (green) 3-5
Upper looper (purple) 3-5
Lower looper (red) 3-5
3-Thread Flatlock
5-9 mm, left needle
Left needle (beige) 1-3
Upper looper (purple) 1-5
Lower looper (red) 5-7
Stitch length: 2-2.5
Cutting width: 1-5
Differential: N
3-7 mm, right needle
Right needle (green) 1-3
Upper looper (purple) 1-5
Lower looper (red) 5-7
3-Thread narrow seam
2 mm, right needle
Right needle (green) 3-6
Upper looper (purple) 3-6
Lower looper (red) 4-6
Stitch length: 1-1.5
Cutting width: 1-2
Differential: N-0.7
Stitch lever: roll hem
3-Thread roll hem
2 mm, right needle
Right needle (green) 3-5
Upper looper (purple) 3-4
Lower looper (red) 5-7
Stitch length: 1-1.5
Cutting width: 1-2
Differential: N-0.7
Stitch lever: roll hem
2-Thread wrapped overlock
5-9 mm, left needle
Left needle (beige) 4-6
Lower looper (red) 3-5
Stitch length: 1-2.5
Cutting width: 1-5
Differential: N
Upper looper converter
3-7 mm, right needle
Right needle (green) 3.5-5.5
Lower looper (red) 2.5-4.5
2-Thread Flatlock
5-9 mm, left needle
Left needle (beige) 1-3
Lower looper (red) 3-5
Stitch length: 2-3
Cutting width: 1-5
Differential: N
Upper looper converter
3-7 mm, right needle
Right needle (green) 2-4
Lower looper (red) 4-6.5
2-Thread roll hem
2 mm, right needle
Right needle (green) 3-5
Lower looper (red) 4-6
Stitch length: 1-1.5
Cutting width: 1-2
Differential: N-0.7
Upper looper converter
2-Thread overlock
5-9 mm, left needle
Left needle (beige) 1-3.5
Lower looper (red) 4-6
Stitch length: 2.5
Cutting width: 1-5
Differential: N
Upper looper converter
3-7 mm, right needle
Right needle (green) 1.5-4
Lower looper (red) 5.5-7.5
Left
needle
Stitch chart
* The scale marks of the tension regulating dial listed below are just a guide. The correct adjustment differs according
to the type of thread and material to be used.
Right
needle
Left
needle
Right
needle
Left
needle
Right
needle
Left
needle
Right
needle
Left
needle
Right
needle