Using the machine, Threading
Preparation / Tips
• Switch the machine off (Power switch to “0”).
• Disconnect machine from electricity supply.
• Support rod with thread guide must be fully raised.
• Open looper cover and cloth plate.
• Turn the handwheel towards you until the needles are fully raised.
• Raise the upper knife.
• Raise the presser foot. The tension is automatically released.
Thread the machine carefully and in the correct sequence.
Invaluable threading aids simplify threading:
• Colored threading illustration
• Color coded thread path on the machine
• Threading accessories
First thread guide on the Machine
Take the thread with both hands and lay it in the groove.
Press the thread down into the 1st guide on the machine until
it clicks into place.
12
To Next Page
Loading...
