EasyManua.ls Logo

JUKI MO-114D - Gathering

JUKI MO-114D
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Adjustments and settings
A
C
B
D
Adjusting the differential feed
The differential feed can be adjusted by simply turning the differential
feed adjustment dial in the direction desired. Always make a trial run.
The differential feed is infinitely variable and can be adjusted while
sewing.
Effect Fabric
2
Wave-free seams
(G)
Thick wool knits, hand knitted articles,
very stretchy fabrics
1.5
Wave-free seams
(H)
Cotton silk, synthetic jersey, sweatshirt
fabrics and ne knits
N Normal feed (I) Woven fabrics
0.7 No puckering (J)
Fine nylon jersey, closely woven fabrics,
lining fabric, satin, poplin
Gathering
Using the differential feed a single layer of fabric can be gathered be-
fore sewing it to a garment.
For example, sleeve heads and lower edges, yokes, lace edging or
frills.
Adjustment:
Stitch - 4 thread overlock
Differential feed – 2
Stitch length - 3-4
Cutting width - 2-3
Increase the needle thread tension (6-8) for a tighter gather.
Note:
When sewing without differential feed, turn the adjustment knob to “N”.
22

Other manuals for JUKI MO-114D

Related product manuals