EasyManua.ls Logo

JUKI MO-6000G Series - Position of the Thread Guides and the Looper Thread Take-Ups of MO-6900 G (J)

JUKI MO-6000G Series
96 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Standard
Adjustment
(40) Position
of
the
thread guides and the looper thread take-ups
of
MO-6900G(J}
M0-6904G (J)
The thread hole
in
the needle thread
guide and the hooked portion
of
the
needle
thread
take-up
are
in
the
position where 1/2 to
the
entire hole
in
the needle thread guide cannot be
observed.
M0-6903G
14,8mm
Needle
thread
take-up
'1-sia""
M0-6914G (J)
Needle thread take-up
of
2-needle machine
Needle thread
guide
of
2-needle
machine
The
thread
hole
in
the
needle
thread
guide
and
the
hooked
portion
of
the needle thread take-
up are In the
position
where 1/2
to
the
entire hole in
the
needle thread
guide"~
M0-6905G
Needle
thread
take-up
st\
M0-691
SG
(J)
Needle
thread
take-up
of
double·
chainstitch machine
The
thread
hole
in
the
needle
thread
guide
and
the
hooked
portion
of
the
needle
thread
take-
up
are
in
the position where
1./2
to
the entire hole In the needle thread
guide
cannot
be observed.
~
(Caution)
The
needle
thread
take-up shall
be
positioned
at
the
lower
dead
point.
-66-

Table of Contents

Related product manuals