JUKI MO-6000G Series - 4) Mo-6900 R Series; Adjustment of the Needle Height and Looper Timmi

11
!11\·
I,
'I
l
fi
11
11
II
·I
i
11
!i
(4) MO-6900R SERIES
No.
Item
Specifications
1
Model
M0-6904R M0-6914R
M0-6916R
2 Feed type Vertical amount of top feed dog
3
Description
1-needle Overlock
2-needle Over1ock
2-needle Safety stitch
r:nachine
machine
machine
4
Stitch type F. S. T. JIS E13
JIS E24
JISE13+D12
(USA standard : 504)
(USA standard : 514) {USA standard : 516)
5
Sewing speed 7,000 rpm (longitudinal amount of top feed less than 6 rrm)
6,000 rpm (longitudinal amount of top feed 6 to 8.5 mm)
6
Stitch length
0.8to4mm
1.5to4mm
7
Needle gauge
-
2mm
32,4.Bmm
8
Overedaina width
3.2
1
4, 4.8, 5.6 mm
3.2.4nm 3.2, 4, 4.8, 6.4 mm
9
Differential feed ratio
Gathering 1 : 2 (Max. 1 : 4), Stretching 1 : 0.7 (Max.1 : 0.6)
10
Needle bar stroke
24.5mm
11
Needle tilt angle
20·
12
Needle
ORGAN DC X 27 (Standard) (DC X 1 can be used as well.)
13
Presser lifting amount 7.0mm 6.5mm
5.5mm
14
Presser foot pressure
49N (5Kg)
15
Stitch adjusting method By pushbutton
16
Upper knife
Rat knife
17
Vertica! amount of top feed dog 3.5to8.5mm
18
Lonaitudnal amount of top feed dog 1 to 7.5 mm (deoending on the ~ifications of the respective machines)
19
Top feed adjusting type
By lever
20
Differential feed adjustment
By lever with micro adjustment mechanism
21
Weight
29kg
22
Lubrication
Gear-~,pe automatic lubrication
23
Lubricating oil * JUKJ MACHINE OIL 18 (Equivalent to ISO VG 18)
24
Needle cooler
Provided as standard (Exduding some of subclass machines)
25
Needle thread heat remover Provided as standard (Excluding some of subclass machines)
26
Micro presser lifting device
Provided as standard
27
Motor
2P 55DW (In case of not less than 7,0CYJ rpm)
2P 400W (In case of less than 7,000 rpm)
• JUKI MACHINE OIL 18 (Equivalent to ISO VG 18)
Part No. : MML018900CA (900 m
f )
-4-
From the Library of Superior Sewing Machine & Supply LLC