Threading (3)
MO-644DN/654DEN
3. Right-hand needle thread (Green)
Place the spool on the spool holder pin right under the green mark-
ing on the retractable support rod thread guide.
(1,2) Bring thread up from the rear of the retractable support rod
thread guide with the green markings to the front of it.
(3,4) Pass the thread through the thread guide plate.
(5) Thread the thread tension dial.
(6,7) Thread the thread guide.
(8) Lay the thread in the notch on the thread take-up lever.
(9) Thread the thread guide.
(10,11) Thread the thread guides on the needle bar.
(12) Turn the handweel toward you until the needles are fully raised.
Thread the right-hand needle.
(13) Bring the thread through under the presser foot and pull about 10
cm of the thread out behind the presser foot.
20
To Next Page
Loading...
