– 20 –
5-8. Editing / setting the patterns, setting the layer, and setting the speed
❶
❷
❸
Start the NC software → click the upper left portion → Click ❶ "Open the file" → ❷ Find the file you
want to edit → ❸ "Open"
5-8-1. Setting the direction of sewing
1) Select ❶ "Batch processing". → Select ❷
"Select all". → Select ❸ "Start from the left"
or "Start from the top". → Select ❹ "Arrange
vertically" or "Arrange laterally". → Select ❺
"Close" to complete the procedure.
❶
❷
❹
❸
❺
To Next Page
Loading...