EasyManua.ls Logo

JUKI SC-910 - Page 12

JUKI SC-910
71 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
– 8 –
2) Label attaching is performed by the automatic one-shot stitching with the CP-160
(Method) Select mark on the CP-160, and turn ON mark of the automatic one-shot stitching.
Explanation) Number of stitches at the section CD can be set up to 500 stitches. If the stitch length is 2 mm, it is
possible to sew approximately 1,000 mm (1 m).
This function can perform the automatic one-shot stitching without using the material end sensor
(ED : optional). Therefore, the sewing machine performs the sewing to the last according to the
sewing pattern even if the label is not located at the end of material when the pedal is depressed
once.
Label
CD
CD

Table of Contents

Related product manuals