JUKI SC-910 User Manual

– 7 –
(3) Example of application
1) When the CP-160 is used together with the material end sensor (ED : optional), it can be used as a
small edge-controller.
(Method) Adjust the position to mark of the CP-160, turn ON material end sensor ON/OFF switch of
the CP-160, and turn ON mark of the automatic one-shot stitching.
Caution) Number of rotations of the automatic one-shot stitchig can be changed by the function setting
(No. 38).

JUKI SC-910 Specifications

General

Brand	JUKI
Model	SC-910
Category	Sewing Machine
Language	English